Fiber Wood SD density 160kg/m³

Home
Catalogue
Fiber Wood FiberTherm SD

Fiber Wood FiberTherm SD density 160kg/m³

Fiber Wood with density 160 Kg/m³.
Fibertherm SD is a fiber wood panel with values of thermal and acoustic insulation, density, breathability, and optimal compressive strength to be used in all parts of the building. Ideal for insulation in wooden buildings, but also in renovations and new traditional buildings.

from 4,53 €/m²

Price list Data sheet Specification

Description
Uses
Characteristics and sizes

The fiber wood panel FiberTherm SD 160 is an acoustic insulation ideal to be placed under flooring systems made with dry and wet screed, or in ceilings with exposed beams. It has a good compressive strength of 100 kPa.
It's easy and quick to install

The fiber wood panel FiberTherm SD 160 is suitable to be installed in dry elevated flooring system with BetonWood cement bonded particle boards or fiber wood panels made with dry system. It has a density equal to 160 kg/m³.

The material is also recyclable, it is certified and made exclusively with wood from controlled forests in compliance with the FSC guidelines (Forest Stewardship Declaration).

The insulating fiber wood panel FiberTherm SD 160 has the following characteristics:

• high compressive strength of 100 kPa;
• acoustic insulation for flooring systems;
• solid insulation for ceilings with exposed beams;
• suitable for floating floor systems with gypsum fiber screed or dry fiber wood boards;
• suitable for wet screed systems;
• open to vapor diffusion;
• easy and fast installation;
• recyclable, ecological, respects the environment;
• building material tested and authorized according to current European standards.

The insulating fiber wood panel FiberTherm SD 160 is suitable for any type of thermal and acoustic insulation under surface covering that requires the use of a rigid material.
In particular this material can be used for the realization of:

• rigid insulation fiber wood panels for walls and roofs, under coverings;

• external insulation of roofs, and walls protected from the weather under the coating;

• insulation between trusses, beams and beams, wooden structures and metal frames,

• internal insulation under the roof or under panels or roof tiles;

• internal insulation of walls and partitions.

Applications

The installation is strictly linked to the type of use of the panel depending on which it will be appropriate to adopt the most suitable application method.
In general it is always necessary to protect this material from moisture both before laying, during the storage phase on site, and before the realization of the covering.
In case of exposure of the material to the water let the material dry.

Available sizes

fiber wood panels with sharp edges

Thickness	Size mm	kg/m²	Pan./pallet	m²/pallet	kg/pallet
21/20 mm	1350 x 600	3,20	116	94,0	approx.300
31/30 mm	1350 x 600	4,80	74	59,9	approx.300

Technical characteristics

Characteristics	Values
Density kg/m³	160
Reaction to fire according to the standard EN 13501-1	E
Coefficient of thermal conductivity λD W/(m·K)	0,038
Specific heat capacity J/(kg·K)	2.100
Resistance to vapor diffusion μ	5
sd value (m)	0,10 (21/20) / 0,15 (31/30)
Thermal resistance RD (m²·K)/W	0,10 (21/20) / 0,15 (31/30)
Dynamic stiffness s¹ (MN/m³)	50 (21/20) / 30 (31/30)
Bending resistance [(kPa·s)m²]	≥50
Compression load ≤5 kPa (mm)	≤2
Panels identification 21/20 mm thickness 31/30 mm thickness	WF-EN 13171-T7-SD50-CP2 WF-EN 13171-T7-SD30-CP2
Waste code (EAK)	030105/170201